Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Searchable, convenient, complete TCP/IP information.
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Application Layer Protocols, Services and Applications (OSI Layers 5, 6 and 7)
      9  TCP/IP Network Configuration and Management Protocols (BOOTP, DHCP, SNMP and RMON)
           9  Host Configuration and TCP/IP Host Configuration Protocols (BOOTP and DHCP)
                9  TCP/IP Bootstrap Protocol (BOOTP)

Previous Topic/Section
BOOTP Vendor-Specific Area and Vendor Information Extensions
Previous Page
Pages in Current Topic/Section
1
234
Next Page
TCP/IP Dynamic Host Configuration Protocol (DHCP)
Next Topic/Section

BOOTP Relay Agents (Forwarding Agents)
(Page 1 of 4)

One reason why the Reverse Address Resolution Protocol (RARP) was quickly replaced by BOOTP is that RARP required the client being configured and the server providing it with an IP address to be on the same physical network. Sure, this is fine when you run a small organization with 10 machines. In this case, all 10 are probably on the same physical network anyway. Larger networks must be divided into multiple physical networks for efficiency, however. RARP would require a separate RARP server for each network, meaning having to duplicate all the functions of a single server onto multiple machines. Worse yet, all the configuration information would also be duplicated, and any changes would have to be made to all the different servers each time.

Why BOOTP Relay Agents Are Necessary

Unlike RARP, BOOTP is designed to allow the BOOTP server and the clients it serves to be on different networks. This centralizes the BOOTP server and greatly reduces the amount of work required of network administrators. However, implementing this feature means increasing the complexity of the protocol. In particular, we need to involve a “third party” device in the configuration process.

You might rightly wonder why this would be the case. Sure, RARP is a low-level protocol that works at the link layer, so that explains why it would have problems putting the client and server on different physical networks. But wasn't the whole point of making BOOTP a high-level protocol that it was able to use IP? And if BOOTP uses IP, can't we sent from one network to another arbitrarily just like any IP-based messaging protocol?

The answer is that even though we are indeed using IP and UDP, BOOTP still has one of the same issues that RARP had: a reliance on broadcasts. The client usually doesn't know the address of a server, so it has to send out its request as a broadcast, saying in essence, “can anyone hear this and give me the information I need?” For efficiency reasons, routers do not route such broadcasts, as they would clog the network. This means that if the server and client are not on the same network, the server can't hear the client's broadcast. Similarly, if the server ever did get the request and broadcast its reply back to the client, the client would never get it anyway.


Previous Topic/Section
BOOTP Vendor-Specific Area and Vendor Information Extensions
Previous Page
Pages in Current Topic/Section
1
234
Next Page
TCP/IP Dynamic Host Configuration Protocol (DHCP)
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.