Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Searchable, convenient, complete TCP/IP information.
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Internet Layer (OSI Network Layer) Protocols
           9  Internet Protocol (IP/IPv4, IPng/IPv6) and IP-Related Protocols (IP NAT, IPSec, Mobile IP)
                9  Internet Protocol Version 4 (IP, IPv4)
                     9  IP Addressing
                          9  IP Addressing Concepts and Issues

Previous Topic/Section
IP Basic Address Structure and Main Components: Network ID and Host ID
Previous Page
Pages in Current Topic/Section
1
2
Next Page
Number of IP Addresses and Multihoming
Next Topic/Section

IP Addressing Categories (Classful, Subnetted and Classless) and IP Address Adjuncts (Subnet Mask and Default Gateway)
(Page 1 of 2)

The preceding topic illustrated how the fundamental division of the 32 bits in an IP address is into the network identifier (network ID) and host identifier (host ID). The network ID is used for routing purposes while the host ID uniquely identifies each network interface on the network. In order for devices to know how to use IP addresses on the network they must be able to tell which bits are used for each ID. However, the “dividing line” is not predefined. It depends on the type of addressing used in the network.

IP Addressing Scheme Categories

Understanding how these IDs are determined leads us into a larger discussion of the three main categories of IP addressing schemes. Each of these uses a slightly different system of indicating where in the IP address the host ID is found.

Conventional (“Classful”) Addressing

The original IP addressing scheme is set up so that the dividing line occurs only in one of a few locations: on octet boundaries. Three main classes of addresses, A, B and C are differentiated based on how many octets are used for the network ID and how many for the host ID. For example, class C addresses devote 24 bits to the network ID and 8 to the host ID. This type of addressing is now often referred to by the made-up word “classful” to differentiate it from newer “classless” scheme.

This most basic addressing type uses the simplest method to divide the network and host identifiers: the class, and therefore the dividing point, are encoded into the first few bits of each address. Routers can tell from these bits which octets belong to which identifier.

Subnetted “Classful” Addressing

In the subnet addressing system, the two-tier network/host division of the IP address is made into a three-tier system by taking some number of bits from a class A, B or C host ID and using them for a subnet identifier. The network ID is unchanged. The subnet ID is used for routing within the different subnetworks that constitute a complete network, providing extra flexibility for administrators. For example, consider a class C address that normally uses the first 24 bits for the network ID and remaining 8 bits for the host ID. The host ID can be split into, say, 3 bits for a subnet ID and 5 for the host ID.

This system is based on the original “classful” scheme, so the dividing line between the network ID and “full” host ID is based on the first few bits of the address as before. The dividing line between the subnet ID and the “sub-host” ID is indicated by a 32-bit number called a subnet mask. In the example above, the subnet mask would be 27 ones followed by 5 zeroes—the zeroes indicate what part of the address is the host. In dotted decimal notation, this would be 255.255.255.224.


Previous Topic/Section
IP Basic Address Structure and Main Components: Network ID and Host ID
Previous Page
Pages in Current Topic/Section
1
2
Next Page
Number of IP Addresses and Multihoming
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.