Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Enjoy The TCP/IP Guide? Get the complete PDF!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Internet Layer (OSI Network Layer) Protocols
           9  Internet Protocol (IP/IPv4, IPng/IPv6) and IP-Related Protocols (IP NAT, IPSec, Mobile IP)
                9  IP Network Address Translation (NAT) Protocol

Previous Topic/Section
IP NAT Bidirectional (Two-Way/Inbound) Operation
Previous Page
Pages in Current Topic/Section
1
2
Next Page
IP NAT "Overlapping" / "Twice NAT" Operation
Next Topic/Section

IP NAT Port-Based ("Overloaded") Operation: Network Address Port Translation (NAPT) / Port Address Translation (PAT)
(Page 1 of 2)

Both traditional NAT and bidirectional NAT work by swapping inside network and outside network addresses as needed to allow a private network to access a public one. For each transaction, there is a one-to-one mapping between the inside local address of a device on the private network, and the inside global address that represents it on the public network. We can use dynamic address assignment to allow a large number of private hosts to share a small number of registered public addresses.

However, there is a potential snag here. Consider our earlier NAT example, where 250 hosts share 20 inside global (public) addresses. If 20 hosts already have transactions in progress, what happens when the 21st tries to access the Internet? There aren't any inside global addresses available for it to use, so it won't be able to.

Using Ports to Multiplex Private Addresses

Fortunately, there is a mechanism already built into TCP/IP that can help us alleviate this situation. The two TCP/IP transport layer protocols, TCP and UDP, both make use of additional addressing components called ports. The port number in a TCP or UDP message helps identify individual connections between two addresses. It is used to allow many different applications on a TCP/IP client and server to talk to each simultaneously, without interference. For example, you use this capability when you open multiple browser windows to access more than one Web page on the same site at the same time. This sharing of IP addresses amongst many connections is called multiplexing. The section on TCP and UDP ports describes all of this in much more detail.

Now, let's come back to NAT. We are already translating IP addresses as we send datagrams between the public and private portions of the internetwork. What if we could also translate port numbers? Well, we can! The combination of an address and port uniquely identifies a connection. As a datagram passes from the private network to the public one, we can change not just the IP address but also the port number in the TCP or UDP header. The datagram will be sent out with a different source address and port. The response will come back to this same address and port combination (called a socket) and can be translated back again.

This method goes by various names. Since it is a technique whereby we can have multiple inside local addresses share a single inside global address, it is called overloading of an inside global address, or alternately, just overloaded NAT. More elegant names that better indicate how the technique works include Port-Based NAT, Network Address Port Translation (NAPT) and Port Address Translation (PAT).

Whatever its name, the use of ports in translation has tremendous advantages. It can allow all 250 hosts on our private network to use only 20 IP addresses—and potentially even fewer than that. In theory you could even have all 250 share a single public IP address at once! You don't want to share so many local hosts that you run out of port numbers, but there are thousands of port numbers to choose from.

Port-based NAT of course requires a router that is programmed to make the appropriate address and port mappings for datagrams as it transfers them between networks. The disadvantages of the method include this greater complexity, and also more potential compatibility issues (such as with applications like FTP) since we must now watch for port numbers at higher layers and not just IP addresses.

Key Concept: Port-based or “overloaded” NAT is an enhancement of regular NAT that allows a large number of devices on a private network to simultaneously “share” a single inside global address by changing the port numbers used in TCP and UDP messages.



Previous Topic/Section
IP NAT Bidirectional (Two-Way/Inbound) Operation
Previous Page
Pages in Current Topic/Section
1
2
Next Page
IP NAT "Overlapping" / "Twice NAT" Operation
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.