Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Enjoy The TCP/IP Guide? Get the complete PDF!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Network Interface / Internet "Layer Connection" Protocols

Previous Topic/Section
TCP/IP Address Resolution For IP Version 6
Previous Page
Pages in Current Topic/Section
12
3
4
Next Page
TCP/IP Internet Layer (OSI Network Layer) Protocols
Next Topic/Section

Reverse Address Resolution and the TCP/IP Reverse Address Resolution Protocol (RARP)
(Page 3 of 4)

RARP General Operation

Here are the steps followed in a RARP transaction (illustrated in Figure 53):


Figure 53: Reverse Address Resolution Protocol (RARP) Operation

RARP uses a simple request/reply exchange to allow a device to obtain an IP address.

 


  1. Source Device Generates RARP Request Message: The source device generates an RARP Request message. Thus, it uses the value 3 for the Opcode in the message. It puts its own data link layer address as both the Sender Hardware Address and also the Target Hardware Address. It leaves both the Sender Protocol Address and the Target Protocol Address blank, since it doesn't know either.

  2. Source Device Broadcasts RARP Request Message: The source broadcasts the ARP Request message on the local network.

  3. Local Devices Process RARP Request Message: The message is received by each device on the local network and processed. Devices that are not configured to act as RARP servers ignore the message.

  4. RARP Server Generates RARP Reply Message: Any device on the network that is set up to act as an RARP server responds to the broadcast from the source device. It generates an RARP Reply using an Opcode value of 4. It sets the Sender Hardware Address and Sender Protocol Address to its own hardware and IP address of course, since it is the sender of the reply. It then sets the Target Hardware Address to the hardware address of the original source device. It looks up in a table the hardware address of the source, determines that device's IP address assignment, and puts it into the Target Protocol Address field.

  5. RARP Server Sends RARP Reply Message: The RARP server sends the RARP Reply message unicast to the device looking to be configured.

  6. Source Device Processes RARP Reply Message: The source device processes the reply from the RARP server. It then configures itself using the IP address in the Target Protocol Address supplied by the RARP server.

It is possible that more than one RARP server may respond to any request, if two or more are configured on any local network. The source device will typically use the first reply and discard the others.


Previous Topic/Section
TCP/IP Address Resolution For IP Version 6
Previous Page
Pages in Current Topic/Section
12
3
4
Next Page
TCP/IP Internet Layer (OSI Network Layer) Protocols
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.