Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Searchable, convenient, complete TCP/IP information.
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Transport Layer Protocols
           9  Transmission Control Protocol (TCP) and User Datagram Protocol (UDP)
                9  TCP/IP Transport Layer Protocol (TCP and UDP) Addressing: Ports and Sockets

Previous Topic/Section
TCP/IP Ports: Transport Layer (TCP/UDP) Addressing
Previous Page
Pages in Current Topic/Section
1
2
Next Page
TCP/IP Client (Ephemeral) Ports and Client/Server Application Port Use
Next Topic/Section

TCP/IP Application Assignments and Server Port Number Ranges: Well-Known, Registered and Dynamic/Private Ports
(Page 1 of 2)

The port numbers we discussed in the previous topic provide a method of transport-layer addressing that allows many applications to use TCP and UDP simultaneously. By specifying the appropriate destination port number, an application sending data can be sure that the right process on the destination device will received the message. Unfortunately, there's still a problem we have to work on before this addressing system will work.

The Problem: Identifying Particular Processes on A Server

To explain it, I need to go back to a familiar example: using the World Wide Web. We fire up our Web browser, which is client software that sends requests using the Hypertext Transfer Protocol (HTTP). We need to either know the IP address of the Web site we want to access, or we may have the IP address supplied to us automatically using DNS. Once we have the address, the Web browser can generate an HTTP message and send it to the Web site's IP address.

This HTTP message is being sent not “just anywhere” on that IP address: it is intended for the Web server process on the site we are trying to reach. The problem is: how does the Web browser (client process) know which port number has been assigned to the server process on the Web site? Port numbers can range from 0 to 65,535, which means a lot of choices. And in theory, every Web site could assign a different port number to its Web server process.

The Solution: Reserved Port Numbers

There are a couple of different ways to resolve this problem. TCP/IP takes what is probably the simplest possible approach: it reserves certain port numbers for particular applications. Each common application has a specific port number that is assigned to it for use by server processes that listen for requests for that application and then respond to them. To avoid chaos, the software that implements a particular server process normally uses the same reserved port number on every IP device, so clients can find it easily.

In our example, the reserved port number for HTTP is 80. Every Web browser just “knows” that Web sites are designed to listen for requests sent to port 80. They will thus use this value in requests, to ensure the IP and TCP software on the Web browser direct these HTTP messages to the Web server software. It is possible for a particular Web server to use a different port number, but in this case, the user of the Web browser must be informed of this number somehow, and must explicitly tell the Web browser to use it instead of the default port number (80).

Key Concept: To allow client devices to more easily establish connections to TCP/IP servers, server processes for common applications use universal server port numbers that clients are pre-programmed to know to use by default.



Previous Topic/Section
TCP/IP Ports: Transport Layer (TCP/UDP) Addressing
Previous Page
Pages in Current Topic/Section
1
2
Next Page
TCP/IP Client (Ephemeral) Ports and Client/Server Application Port Use
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.