Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Read offline with no ads or diagram watermarks!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Application Layer Protocols, Services and Applications (OSI Layers 5, 6 and 7)
      9  TCP/IP Key Applications and Application Protocols
           9  TCP/IP Interactive and Remote Application Protocols
                9  Telnet Protocol

Previous Topic/Section
Telnet Interrupt Handling Using Out-Of-Band Signaling: The Telnet Synch Function
Previous Page
Pages in Current Topic/Section
1
234
Next Page
Berkeley Remote ("r") Commands
Next Topic/Section

Telnet Options and Option Negotiation
(Page 1 of 4)

The basic Telnet Network Virtual Terminal (NVT) specification solves the problem of compatibility between different terminal and computer types by defining a common representation for data and commands that every Telnet client and server uses. The price for this universal representation, however, is very high: all of the advanced or special capabilities of terminals and hosts is stripped off. The result is a language that everyone can speak, but that is not capable of much more than basic conversation.

The creators of Telnet recognized that while it was important to define NVT as a common base to ensure cross-device compatibility, it was also essential that some means be provided by which clients and servers could agree to use more advanced means of communication. They defined a set of Telnet options, and a mechanism by which a Telnet client and server can negotiate which options they want to use.

Most Telnet options are used for the purpose of improving the efficiency of how data is transferred between devices. For example, by default the NVT assumes half-duplex operation with each device needing to use the Go Ahead command after each transmission. However, virtually all hardware now supports full-duplex communication, so devices will usually agree to use the Suppress Go Ahead option to eliminate the need to send this character. Similarly, it is possible for devices to negotiate the sending of 8-bit binary data instead of the standard 7-bit ASCII of the Telnet NVT.

The process of Telnet option negotiation is described in the main Telnet standard document, RFC 854, as well as a companion document, RFC 855 (Telnet Option Specifications). The options themselves are described in a separate set of Internet standards. Several of these were published at the same time as RFCs 854 and 855; others were defined earlier as part of previous versions of Telnet, and still others have been added over the years. There are now several dozen different Telnet options in existence; a master list is maintained by IANA (like all other TCP/IP parameters).

On The Web: An up-to-date listing of all Telnet options can be found on the IANA Web site at: http://www.iana.org/assignments/telnet-options



Previous Topic/Section
Telnet Interrupt Handling Using Out-Of-Band Signaling: The Telnet Synch Function
Previous Page
Pages in Current Topic/Section
1
234
Next Page
Berkeley Remote ("r") Commands
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.