Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Enjoy The TCP/IP Guide? Get the complete PDF!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Application Layer Protocols, Services and Applications (OSI Layers 5, 6 and 7)
      9  TCP/IP Network Configuration and Management Protocols (BOOTP, DHCP, SNMP and RMON)
           9  Host Configuration and TCP/IP Host Configuration Protocols (BOOTP and DHCP)
                9  TCP/IP Dynamic Host Configuration Protocol (DHCP)
                     9  DHCP Configuration and Operation

Previous Topic/Section
DHCP Lease Reallocation Process
Previous Page
Pages in Current Topic/Section
1
2
3
Next Page
DHCP Early Lease Termination (Release) Process
Next Topic/Section

DHCP Lease Renewal and Rebinding Processes
(Page 2 of 3)

Lease Renewal/Rebinding Process Steps

The following steps summarize the renewal/rebinding process. Obviously, the exact sequence of operations taken by a client depends on what happens in its attempts to contact a server; for example, if it is successful with renewal, it will never need to attempt rebinding. An example renewal and rebinding is illustrated in Figure 265. Note also that the same notes about addressing fields, relay agents and such that I mentioned in the allocation process topic apply here as well.


Figure 265: DHCP Lease Renewal and Rebinding Processes

This diagram shows the example of a client that presently holding a lease with Server #2 attempting to contact it to renew the lease. However, in this case, Server #2 is down for maintenance. The server is unable to respond and the client remains stuck at Step #2 in the renewal/rebinding process. It keeps sending DHCPREQUEST messages to Server #2 until its T2 timer expires. It then enters the rebinding state and broadcasts a DHCPREQUEST message, which is heard by Server #1, which in this case agrees to extend its current lease.

 


1. Renewal Timer (T1) Expires

The renewal timer, T1, is set by default to 50% of the length of the lease. When the timer goes off, the client transitions from the BOUND state to the RENEWING state.

Note that a client may initiate lease renewal prior to T1 timer expiration if it desires.

2. Client Sends DHCPREQUEST Renewal Message

The client creates a DHCPREQUEST message that identifies itself and its lease. It then transmits the message directly to the server that initially granted the lease, unicast. Note that this is different from the DHCPREQUEST messages used in the allocation/reallocation processes, where the DHCPREQUEST is broadcast. The client may request a particular new lease length, just as it may request a lease length in its requests during allocation, but as always, the server makes the final call on lease length.

3. Server Receives and Processes DHCPREQUEST Message and Creates Reply

Assuming the server is reachable, it will receive and process the client's renewal request. There are two possible responses:

  • Server Agrees To Renew Client Lease: The server decides that the client's lease can be renewed. It prepares to send to the client a DHCPACK message to confirm the lease's renewal, indicating the new lease length and any parameters that may have changed since the lease was created or last renewed.

  • Server Refuses To Renew Client Lease: The server decides for whatever reason not to renew the client's lease. It will create a DHCPNAK message.
4. Server Sends Reply

The server sends the DHCPACK or DHCPNAK message back to the client.

5. Client Receives and Processes Server Reply

The client takes the appropriate action in response to the server's reply:

  • Positive Acknowledgment: The client receives a DHCPACK message, renewing the lease. The client makes note of the new lease expiration time and any changed parameters sent by the server, resets the T1 and T2 timers, and transitions back to the BOUND state. Note that the client does not need to do an ARP IP address check when it is renewing.

  • Negative Acknowledgment: The message is a DHCPNAK, which tells the client that its lease renewal request has been denied. The client will immediately transition to the INIT state to get a new lease—step #1 in the allocation process.
6. Rebinding Timer (T2) Expires

If the client receives no reply from the server, it will remain in the RENEWING state, and will regularly retransmit the unicast DHCPREQUEST to the server. During this period of time, the client is still operating normally, from the perspective of its user. If no response from the server is received, eventually the rebinding timer (T2) expires. This will cause the client to transition to the REBINDING state. Recall that by default, the T2 timer is set to 87.5% (7/8ths) of the length of the lease.

7. Client Sends DHCPREQUEST Rebinding Message

Having received no response from the server that initially granted the lease, the client “gives up” on that server and tries to contact any server that may be able to extend its existing lease. It creates a DHCPREQUEST message and puts its IP address in the CIAddr field, indicating clearly that it presently owns that address. It then broadcasts the request on the local network.

8. Servers Receives and Processes DHCPREQUEST Message and Send Reply

Each server receives the request, and responds according to the information it has for the client (a server that has no information about the lease or may have outdated information does not respond):

  • Server Agrees To Rebind Client Lease: A server has information about the client's lease and agrees to extend it. It prepares for the client a DHCPACK message to confirm the lease's renewal, indicating any parameters that may have changed since the lease was created or last renewed.

  • Server Decides Client Cannot Extend Its Current Lease: A server determines that for whatever reason, this client's lease should not be extended. It gets ready to send back to the client a DHCPNAK message.
9. Server Sends Reply

Each server that is responding to the client sends its DHCPACK or DHCPNAK message.

10. Client Receives Server Reply

The client takes the appropriate action in response to the two possibilities in the preceding step:

  • Positive Acknowledgment: The client receives a DHCPACK message, rebinding the lease. The client makes note of the server that is now in charge of this lease, the new lease expiration time, and any changed parameters sent by the server. It resets the T1 and T2 timers, and transitions back to the BOUND state. (It may also probe the new address as it does during regular lease allocation.)

  • Negative Acknowledgment: The message is a DHCPNAK, which tells the client that some server has determined that the lease should not be extended. The client immediately transitions to the INIT state to get a new lease—step #1 in the allocation process.
11. Lease Expires

If the client receives no response to its broadcast rebinding request, it will, as in the RENEWING state, retransmit the request regularly. If no response is received by the time the lease expires, it transitions to the INIT state to get a new lease.


Previous Topic/Section
DHCP Lease Reallocation Process
Previous Page
Pages in Current Topic/Section
1
2
3
Next Page
DHCP Early Lease Termination (Release) Process
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.