|
ICMPv4 Source Quench Messages
(Page 2 of 3)
ICMPv4 Source Quench Message Format
The specific format for ICMPv4 Source
Quench messages can be found in Table 90
and Figure 140.
Table 90: ICMPv4 Source Quench Message Format
Field
Name
|
Size (bytes)
|
Description
|
Type
|
1
|
Type: Identifies
the ICMP message type; for Source Quench messages this is set
to 4.
|
Code
|
1
|
Code:
Identifies the subtype of error being communicated. For
Source Quench messages this is not used, and the field is set
to 0.
|
Checksum
|
2
|
Checksum: 16-bit
checksum field for the ICMP header, as described in the
topic on the ICMP common message format.
|
Unused
|
4
|
Unused:
4 bytes that are left blank and not used.
|
Original
Datagram Portion
|
Variable
|
Original Datagram Portion:
The full IP header and the first 8 bytes of the payload of the datagram
that was dropped due to congestion.
|
|